Thank You for Your visit to the VISCOM 2017 fair

Dear Ladies and Gentlemen,

We sincerely thank you very much for visiting our booth at Viscom 2017.

We are delighted to have such a lot of interest and inquiries for our latest products and laser technologies.

If someone didn’t have the chance to come to the exhibition, we remind the full range equipment, including the LASERBRIDGE MARK V, is available at PROEL TSI show room in Codroipo (Udine); we are only 30 min from Trieste airport (TRS) and less than one hour from Venice (VCE) airport.

For more questions or inquiry, please feel free to contact us or visit our website www.proeltsi.com.

Join us

For any information please contact Proel TSI sales office: email sales@proeltsi.com, phone +39.0432.815047

Advertisements

Viscom 2017 – Ringraziamento

Rientrati dalla fiera Viscom2017, volevamo ringraziare tutti i Visitatori, i nostri affezionatissimi Clienti, i nostri Collaboratori e tutti coloro che seguendoci ci regalano emozioni che alimentano la passione nel nostro lavoro.

I nostri sistemi di taglio “ELASER1200” e “Z–GALVA” hanno calamitato l’attenzione del pubblico e degli addetti ai lavori, che sono intervenuti numerosissimi affollando lo stand e dimostrandoci il loro apprezzamento per la nostra tecnologia.

Per coloro che non ci hanno potuto visitare in fiera, ricordiamo che la gamma completa dei nostri macchinari è esposta  nel nostro show-room presso la sede di Codroipo (Ud), a solo 30 minuti dall’aeroporto di Trieste e a meno di un’ora da quello di Venezia.

Vi invitiamo inoltre a visitare il nostro sito www.proeltsi.com e a contattarci per prenotare una visita per avere modo di verificare personalmente la qualità dei nostri macchinari.

Proel TSI - Join us

Export to HappyJapan Embroidery Machines Machine Parameters Setting

The New Transmission to HappyJapan embroidery machines (with TCP-IP protocol) allows you to set all the embroidering parameters. FocusCut III and the Millennium III, before the embroidery transmission, display the following Dialog for any parameter assignment :
TrasmHappyJapanEn[1]

If you already have a Proel TSI Account enabled for download, you can download new Proel TSI SUITE version with latest versions of Millennium III (software for embroidery creation) and FocusCut III (software for laser machines)  that contain this new feature.

Click here to go directly to your Proel TSI Account and download the latest versions of Millennium III and FocusCut III.

Don’t you have a Proel TSI Account ?

Click here to create a new Proel TSI Account. Then you will get 3 free registrations and contacting the technical support, at support@proeltsi.com, you can enable the download of the latest versions of FocusCut III and Millennium III.

For any enquire about software download, please contact Proel TSI support department at the e-mail address support@proeltsi.com or by phone at +39.0432.815047

Import Other Home Machine Embroidery Formats


  Box Millennium

 Millennium III and FocusCut III softwares

Now Millennium III and FocusCut III are able to import other embroidery formats normally used by the household embroidery machines.

In details, the new formats that Proel TSI Suite is able to handle are:

  • Husqvarna  .HUS
  • Husqvarna-Viking  .SHV
  • Viking  .VIP
  • Viking-Pfaff  .VP3

in addition to the already supported formats:

Barudan .fdr  –  Barudan .dat  –  Barudan .fmc  –  Barudan .u01  –  Barudan .e01  –  Barudan .f01  –  Brother .pec  –  Brother .pes  –  Happy .tap  –  Janome .jef  –  Janome .sew  –  Juki B .m3  –  Melco .cnd  –  Melco .exp  –  Mitsubishi .100  –  Pfaff .ksm  –  Pfaff .pcs  –  Proel  .lmu  –  Proel  .pmu  –  Proel  .lam  –  Proel .pum  –  Tajima .dsb  –  Tajima .dst  –  Tajima .dsz  –  Tajima .tbf  –  Toyota  .10o  –  Wilcom Tajima .t01  –  Wilcom Eltac .t02  –  Wilcom Barudan .t03  –  Wilcom Marco .t04  –  Wilcom Zsk .t05  –  Wilcom Pfaff .t09

 

VISCOM 2017 – October 12 to 14

PROEL TSI at Milan VISCOM 2017 exhibition

29th International Trade Fair and Conference on Visual Communication

 

viscom2017en

 

Proel TSI is very glad to invite you at the VISCOM MILANO 2017 exhibition.

October 12 to 14, 2017.

Hall 12, Booth M34.

At our Booth, you will see in operation the E-Laser 1200 system, the perfect combination of embroidery and laser that can be installed on any embroidery machine brand.

We will show you the latest version of embroidery software MILLENNIUM III, and the latest version of the software for laser machine FocusCut III which can easily combine laser cutting parts and embroidery parts without removing the cloth from the  embroidery frame.

You will also find information about all Proel TSI products for the embroidery industry and about all our laser machines for cutting and engraving.

Register Now (for Free) and Come Visit !

With Proel TSI Invitation Code 6591509755 You will be able to register at VISCOM
MILANO 2017
and enter for free and without waiting in line.

Here’s what you need to do to receive your admission ticket:

1.  Enter your Invitation Code (6591509755) and register at this Registration Page.

2.  Print out the PDF document (with QrCode) that you will receive by e-mail.

3.  Enter for free and without waiting in line on VISCOM (Hall 8/12)

Pay Attention:

This Registration Procedure is avaiable until October 6th 2017.

For more information please contact Proel TSI sales office: email sales@proeltsi.com, phone +39.0432.815047 or visit our website www.proeltsi.com